Other information:
Adjustment
NOTE:
The roof opening panel must be in the CLOSED position.
Loosen the roof opening panel bolts on both sides.
Measure and adjust the front of the roof opening panel glass to roof clearances as shown.
Measure and adjust the rear of the roof opening panel glass to roof cl..
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the B-pillar trim panel.
Refer to: B-Pillar Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).
Remove the bolt.
Torque:
30 lb.ft (40 Nm)
Rotate the seatbelt shoulder height adjuster to release the locking tab..