Other information:
Removal
NOTE:
LH side shown, RH side similar.
Remove the rear door window control switch.
Remove the rear door window control switch from the door trim panel.
Disconnect the rear door window control switch electrical connector...
BXXXX:4A (any BXXXX DTC with a 4A failure type) Incorrect Component Installed
Normal Operation and Fault Conditions
The RCM monitors all SRS device connections. If the RCM detects a
device connected that is not stored in memory or is not configured for
the component, the RCM sets a DTC and sends a message to the IPC to
illuminate airbag warning indicator...