Ford Fiesta: Body and Paint / Seatbelt Systems

Ford Fiesta 2014 - 2019 Service Manual / Body and Paint / Seatbelt Systems

Rear Bumper Cover. Disassembly and Assembly

DISASSEMBLY NOTE: Disassembly steps in this procedure may contain assembly details. Remove the rear bumper cover. Refer to: Rear Bumper Cover (501-19 Bumpers, Removal and Installation)...

Seatbelt Systems - Overview. Description and Operation

Overview - Safety Belt System Each safety belt is a combination lap and shoulder belt (continuous loop), 3-point system. The continuous loop uses a common slip tongue and retractor...

Other information:

Ford Fiesta 2014 - 2019 Service Manual: Diagnostic Methods. Description and Operation

This document provides critical diagnostic knowledge required for successful repair outcomes. It identifies technical competencies expected by users of this manual. Ford Diagnostic Assumptions Ford diagnostics assume the vehicle concern described by the test title is currently present...

Ford Fiesta 2014 - 2019 Service Manual: Tire Pressure Monitoring System (TPMS). Diagnosis and Testing

DTC Charts Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods (100-00 General Information, Description and Operation). BCM DTC Chart DTC Description Action B1182:00 Tire Pressure Monitor..

Brake Master Cylinder. Removal and Installation

Removal

NOTICE: If the fluid is spilled on the paintwork, the affected area must be immediately washed down with cold water.

NOTE: Removal steps in this procedure may contain installation details.

All vehicles

Remove the battery tray.
Refer to: Battery Tray - 1.6L Duratec-16V Ti-VCT (88kW/120PS) – Sigma (414-01 Battery, Mounting and Cables, Removal and Installation).
Refer to: Battery Tray - 1.6L EcoBoost (132kW/180PS) – Sigma (414-01 Battery, Mounting and Cables, Removal and Installation).
Disconnect the vacuum tube from the brake booster and detach the routing clip.