Ford Fiesta: Seating / Specifications
Torque Specifications
|
Description
|
Nm
|
lb-ft
|
lb-in
|
|
Rear seat backrest hinge bolts a
|
40
|
30
|
-
|
|
Rear seat backrest striker bolts
|
25
|
18
|
-
|
aDiscard and install new.
Overview
Seating - Heated
This system allows independent heating of each front seat. The components of the system consist of the following:
seat heater mats (located on the seat cushion and backrest)
heated seat relays (located in the CJB )
heated seat switches (located on the instrument panel)
BCM
..
Other information:
System Operation
Battery Saver
NOTE:
Time-out is 60 seconds if the vehicle is in factory mode or in transport mode.
To save battery voltage, the BCM provides automatic shut-off of the
courtesy and demand lamps after a time-out period when the ignition is
OFF.
For specific information of the battery saver feature for the interior lamps, Refer to: Interior Lighting - System..
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the EVAP canister.
Refer to: Evaporative Emission Canister (303-13B Evaporative Emissions -
1.6L EcoBoost (132kW/180PS) – Sigma, Removal and Installation).
Remove the EVAP canister solenoid.
Release the tabs and re..
Categories
Preliminary Inspection
Verify the customer concern by carrying out a road test on a
smooth road. If any vibrations are apparent, Refer to the Symptom
Chart: NVH.
To maximize tire performance, inspect for signs of incorrect
inflation and uneven wear, which may indicate a need for balancing,
rotation or front suspension alignment.
Correct tire pressure and driving techniques have an
important influence on tire life. Heavy cornering, excessively rapid
acceleration and unnecessary sharp braking increase tire wear.
Correct
tire pressure and driving techniques have an important influence on
tire life. Heavy cornering, exce
read more