Other information:
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
The HCU and ABS module are serviced as an assembly.
NOTE:
The PMI process must begin with the current ABS module installed. If
the current ABS module does not respond to the diagnostic scan tool, the
tool may prompt for As-Built Data as part of the repair.
If installing a ne..
B007F:11, B007F:12, B007F:13 and B007F:1A
Refer to Wiring Diagrams Cell 46 for schematic and connector information.
Normal Operation and Fault Conditions
The RCM continuously monitors the passenger safety belt retractor pretensioner circuits for the following faults:
Resistance out of range
Unexpected voltage
Short to ground
Faulted passe..