Ford Fiesta Manuals

Ford Fiesta: Engine / Accessory Drive - 1.6L EcoBoost (132kW/180PS) – Sigma

Ford Fiesta 2014 - 2019 Service Manual / Engine / Accessory Drive - 1.6L EcoBoost (132kW/180PS) – Sigma

Turbocharger. Removal and Installation

Materials Name Specification Engine Oil - SAE 5W-20 - Synthetic Blend Motor OilXO-5W20-Q1SP WSS-M2C945-B1  Removal NOTICE: Whenever turbocharger air intake system components are removed, always cover open ports to protect from debris...

Accessory Drive - Component Location. Description and Operation

Item Description 1 Accessory drive belt tensioner 2 Water pump pulley 3 Crankshaft belt pulley 4 Pulley - A/C compressor 5 Drive belt idler pulley assembly 6 Generator pulley 7 Accessory drive belt ..

Other information:

Ford Fiesta 2014 - 2019 Service Manual: Front Stabilizer Bar. Removal and Installation


Special Tool(s) / General Equipment 300-OTC1585AEPowertrain Lift Tie Rod End Remover Wooden Block Removal   WARNING: Before beginning any service procedure in this section, refer to Safety Warnings in section 100-00 General Information. Failure to follow this instruction may result in serious personal injury. Steering w..

Ford Fiesta 2014 - 2019 Service Manual: Air Conditioning (A/C) Compressor Outlet Line - 1.6L EcoBoost (132kW/180PS) – Sigma. Removal and Installation


Removal NOTE: Removal steps in this procedure may contain installation details. Recover the refrigerant. Refer to: Air Conditioning (A/C) System Recovery, Evacuation and Charging (412-00 Climate Control System - General Information) . With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lif..

Categories

Front Strut and Spring Assembly. Removal and Installation

Removal

NOTE: Removal steps in this procedure may contain installation details.

NOTE: This step is only necessary when installing a new component to the left-hand side.

Remove the nuts and position aside the remote brake fluid reservoir.
Torque: 62 lb.in (7 Nm) Remove the strut and spring assembly upper mount nuts.
Torque: 22 lb.ft (30 Nm)

read more

Copyright © 2025 www.fofiesta7.com