Other information:
Inspection
NOTE:
Do not use a caustic cleaning solution or a wire brush to clean the pistons or damage can occur.
Clean and inspect the (1) ring lands, (2) pin bosses,
(3) skirts and the (4) tops of the pistons. If wear marks, scores or
glazing is found on the piston skirt, check for a bent or twisted
connecting rod...
Programming
NOTE:
All RKE transmitters must be programmed at the same time. Entering the
programming mode erases all previously programmed RKE transmitters
(Integrated Keyhead Transmitters (IKTs) and key fobs). The PATS portion
of the programmed Integrated Keyhead Transmitters (IKTs) is unaffected...