Ford Fiesta: Electronic Engine Controls - 1.6L EcoBoost (132kW/180PS) – Sigma / Electronic Engine Controls - System Operation and Component Description. Description and Operation
System Operation
Refer to Powertrain Control/Emissions Diagnosis (PC/ED) manual. See Section 1 Description and Operation.
Component Description
Refer to Powertrain Control/Emissions Diagnosis (PC/ED) manual. See Section 1 Description and Operation.
Overview
The EEC system provides optimum control of the engine through the
enhanced capability of the PCM . The EEC system also has an OBD
monitoring system with features and functions to meet federal
regulations on exhaust emissions...
DTC Chart: Powertrain Control Module (PCM)
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices...
Other information:
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
This step is only necessary when installing a new component.
NOTE:
The PMI (programmable module installation) process must begin with the
current PCM installed...
Adhesives
NOTE:
The following illustrations are examples of structural adhesive application and are not all inclusive.
The
correct adhesive bonding is essential to repairing the vehicle
correctly. Adhesives are used in many areas of the body structure in
place of welding...
Categories
Special Tool(s) /
General Equipment
Flat Headed Screw Driver
Transmission Jack
Vehicle/Axle Stands
Removal
NOTICE:
Suspension fasteners are critical parts that affect
performance of vital components and systems. Failure of these fasteners
may result in major service expense. Use the same or equivalent parts if
replacement is necessary. Do not use a replacement part of lesser
quality or substitute design. Tighten fasteners as specified.
Remove the floor console.
Refer to: Floor Console (501-12 Instrum
read more