Ford Fiesta: Battery and Charging System

Removal Remove the luggage compartment lid moulding. Refer to: Luggage Compartment Lid Moulding - 4-Door (501-08 Exterior Trim and Ornamentation, Removal and Installation)...

Charging System - General Information

Other information:

Ford Fiesta 2014 - 2019 Service Manual: Airbag and Seatbelt Pretensioner Supplemental Restraint System (SRS) - System Operation and Component Description. Description and Operation

System Operation System Diagram - Supplemental Restraint System (SRS) Item Description 1 RCM 2 HS-CAN 3 Passenger Front Door Impact Severity Sensor 4 Driver Safety Belt Buckle Sensor 5 RF Passenger Safety Belt Buckle Sensor 6 RH Front Impact Severity Sensor 7 Driver Front Door Impact Severity Sen..

Ford Fiesta 2014 - 2019 Service Manual: Pinpoint Test - DTC: O. Diagnosis and Testing

B11D8:12 and B11D8:14 Refer to Wiring Diagrams Cell 46 for schematic and connector information. Normal Operation and Fault Conditions On vehicles equipped with a 1.0L Gasoline Turbocharged Direct Injection (GTDI) or 1.6L Gasoline Turbocharged Direct Injection (GTDI) engine, the RCM transmits an event notification signal which communicates crash status and SRS deploy..

Front Strut and Spring Assembly. Removal and Installation

Removal

NOTE: Removal steps in this procedure may contain installation details.

NOTE: This step is only necessary when installing a new component to the left-hand side.

Remove the nuts and position aside the remote brake fluid reservoir.
Torque: 62 lb.in (7 Nm)

Remove the strut and spring assembly upper mount nuts.
Torque: 22 lb.ft (30 Nm)