Ford Fiesta: Instrumentation and Warning Systems / Parking Aid - Vehicles With: Parking Aid Camera
Removal
NOTE:
The removal steps in this procedure may include installation details.
Remove the RH headlamp assembly.
Refer to: Headlamp Assembly (417-01 Exterior Lighting, Removal and Installation)...
Overview
The
rear view camera system visually aids the driver while reversing or
reverse parking the vehicle. The system has features that provide
guideline overlays on the video image to assist the driver in aligning
the vehicle with another stationary object or parking space...
Other information:
Special Tool(s) /
General Equipment
Resistance Spotwelding Equipment
Air Body Saw
8 mm Drill Bit
MIG/MAG Welding Equipment
Spot Weld Drill Bit
Removal
WARNING:
Before beginning any service procedure in this
manual, refer to Safety Warnings in section 100-00 General Information...
U2300:55, U2300:64
Refer to Wiring Diagrams Cell 46 for schematic and connector information.
NOTE:
DTC U2300:55 is set in every new RCM installed until configuration data
is successfully received from the IPC . DO NOT install any new
components for this DTC unless directed to do so in the pinpoint test...
Categories
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the floor console.
Refer to: Floor Console (501-12 Instrument Panel and Console, Removal and Installation).
Remove the driver seat.
Refer to: Front Seat (501-10 Seating, Removal and Installation).
Remove the parking brake cable adjustment lock nut.

Loosen the parking brake cable adjustment nut.
read more