Ford Fiesta: Front Suspension / Front Suspension - Overview. Description and Operation
General
A newly developed McPherson front suspension with L-shaped lower arms is used.
The lower arm bushes have been enlarged compared with the previous model. This further improves front axle rigidity.
The shock absorbers are gas shock absorbers.
NOTE:
The ABS sensor
rings are built into the seals in the front wheel bearings. They must be
checked during servicing to ensure they are correctly positioned...
Removal
NOTE:
Removal steps in this procedure may contain installation details.
With the vehicle in NEUTRAL, position it on a hoist...
Other information:
Check
NOTE:
Refer to the appropriate Section 303-01 for the specification.
Measure the cylinder bore at the top, middle and bottom
of piston ring travel in 2 directions as indicated. Verify the cylinder
bore is within the wear limit...
Special Tool(s) /
General Equipment
Resistance Spotwelding Equipment
Grinder
Knife
Spot Weld Drill Bit
Locking Pliers
Materials
Name
Specification
Metal Bonding AdhesiveTA-1, TA-1-B, 3M™ 08115, LORD Fusor® 108B, Henkel Teroson EP 5055
-
Seam SealerTA-2-B, 3M™ 08308, LORD Fusor® 803DTM
-
Flex..
Categories
Removal
NOTE:
Removal steps in this procedure may contain installation details.
WARNING:
Before beginning any service procedure in this
manual, refer to health and safety warnings in section 100-00 General
Information. Failure to follow this instruction may result in serious
personal injury.
Refer to: Health and Safety Precautions (100-00 General Information, Description and Operation).
Remove the wheel and tire.
Refer to: Wheel and Tire (204-04A Wheels and Tires, Removal and Installation).
read more