Ford Fiesta: Electrical Distribution / Wiring Harnesses

Module Programming. General Procedures

Check NOTE: Perform the following pre-checks to make sure module programming completes without errors. NOTE: Starting the engine prior to creating a programming session may prevent certain part number information from being inhaled by the IDS ...

Transmission Control Module (TCM) Wiring Harness. Removal and Installation

Special Tool(s) / General Equipment Locking Pliers Removal NOTE: Removal steps in this procedure may contain installation details...

Other information:

Ford Fiesta 2014 - 2019 Service Manual: Pinpoint Test - DTC: E. Diagnosis and Testing

B0011:11, B0011:12, B0011:13 and B0011:1A Refer to Wiring Diagrams Cell 46 for schematic and connector information. Normal Operation and Fault Conditions The RCM continuously monitors the passenger airbag stage 2 circuits for the following faults: Resistance out of range Unexpected voltage Short to ground Faulted passenger airbag ..

Ford Fiesta 2014 - 2019 Service Manual: Evaporative Emission System Leak Test. General Procedures

Activation Disconnect the vapor tube-to-EVAP canister purge valve quick connect coupling (engine side). Refer to: Quick Release Coupling (310-00B Fuel System - General Information - 1.6L EcoBoost (132kW/180PS) – Sigma, General Procedures). Connect the VACUTEC Smoke Machine Fuel Evaporative Emission Tester to the EVAP canister purge valve fitting. Refer to the..