Introduction
WARNING:
Before beginning any service procedure in this manual, refer
to health and safety warnings in section 100-00 General Information...
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Lower the headliner.
Refer to: C-Pillar Upper Trim Panel - 4-Door (501-05 Interior Trim and Ornamentation, Removal and Installation).
Refer to: Headliner - 5-Door (501-05 Interior Trim and Ornamentation, Removal and Installation)...
System Operation
Headlamps
System Diagram
Low Beams
The BCM
monitors the headlamp switch position by sending voltage signals on
multiple circuits to the headlamp switch. There is one circuit for each
headlamp switch position...
NOTE:
Removal steps in this procedure may contain installation details.
Remove the floor console.
Refer to: Floor Console (501-12 Instrument Panel and Console, Removal and Installation).
Remove the driver seat.
Refer to: Front Seat (501-10 Seating, Removal and Installation).
Remove the parking brake cable adjustment lock nut.
Loosen the parking brake cable adjustment nut.