Ford Fiesta: Exhaust System
Removal
With the vehicle in N , position it on a hoist.
Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation)...
Other information:
B00B5:11, B00B5:12, B00B5:13 and B00B5:1D
Refer to Wiring Diagrams Cell 46 for schematic and connector information.
Normal Operation and Fault Conditions
The RCM monitors the driver seat position sensor circuits for the following faults:
Open circuit
Short to voltage
Short to ground
Current out of range
Faulted driver seat pos..
General Specifications
Item
Specification
Generator - 1.0L EcoBoost engine
Generator pulley ratio
2.62:1
Rating
97 amps at 750 rpm (min) to 166 amps at 2,300 rpm (max)
Voltage regulator type
Electronic internal with generator
Generator..
Ordering certified copies, translation and
Apostille documents. Globalapostille.us
Categories
Removal
NOTE:
Removal steps in this procedure may contain installation details.
WARNING:
Before beginning any service procedure in this
manual, refer to health and safety warnings in section 100-00 General
Information. Failure to follow this instruction may result in serious
personal injury.
Refer to: Health and Safety Precautions (100-00 General Information, Description and Operation).
Remove the wheel and tire.
Refer to: Wheel and Tire (204-04A Wheels and Tires, Removal and Installation).
read more