Ford Fiesta Manuals

Ford Fiesta: Suspension / Wheels and Tires

Wheel Studs - 1.6L EcoBoost (132kW/180PS) – Sigma. Removal and Installation

Special Tool(s) / General Equipment 211-001 (TOOL-3290-D) Remover, Tie-Rod End Removal NOTICE: Suspension fasteners are critical parts that affect performance of vital components and systems...

Specifications

  Material Item Specification Fill Capacity   Material: Motorcraft® High Temperature Nickel Anti-Seize Lubricant / XL-2 — —   Material: Motorcraft® Wheel and Tire Cleaner / ZC-37-A — — It..

Other information:

Ford Fiesta 2014 - 2019 Service Manual: Passive Anti-Theft System (PATS) Center Antenna. Removal and Installation


Removal Remove the floor console. Refer to: Floor Console (501-12 Instrument Panel and Console, Removal and Installation). Pull the lock tab outward and disconnect the electrical connector, unclip and remove the PATS center antenna and bracket assembly. NOTE: This step is only necessary when installing a new c..

Ford Fiesta 2014 - 2019 Service Manual: Receiver Drier - 1.6L EcoBoost (132kW/180PS) – Sigma. Removal and Installation


Removal NOTE: Removal steps in this procedure may contain installation details. Recover the refrigerant. Refer to: Air Conditioning (A/C) System Recovery, Evacuation and Charging (412-00 Climate Control System - General Information) . With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lif..

Categories

Ride Height Measurement. General Procedures

Special Tool(s) / General Equipment

Surface Gauge

Check

Ride Height Measurement - Front

NOTE: Make sure that the vehicle is positioned on a flat, level surface and the tires are inflated to the correct pressure. Vehicle should have a full tank of fuel.

Ride height = 2-3
Measurement 2
Measurement 3
Use the General Equipment: Surface Gauge

read more

Copyright © 2025 www.fofiesta7.com