Ford Fiesta: Passive Anti-Theft System (PATS) - Vehicles With: Keyless Entry and Push Button Start / Passive Anti-Theft System (PATS) Parameter Reset. General Procedures

Ford Fiesta 2014 - 2019 Service Manual / Electronic Feature Group / Passive Anti-Theft System (PATS) - Vehicles With: Keyless Entry and Push Button Start / Passive Anti-Theft System (PATS) Parameter Reset. General Procedures

Programming

NOTE: This procedure erases all keys from the RFA module. Make sure at least two passive keys are present before performing this procedure.

NOTE: To enter the PATS security access if no programmed passive keys are available, start a vehicle session using a tear tag or PCM part number. The PATS security access can still be granted even with the ignition off.
Refer to: Diagnostic Methods (100-00 General Information, Description and Operation).

From the diagnostic scan tool, enter TOOLBOX. Select Body>Security>PATS Functions and follow the on-screen instructions to enter PATS security access.

From the diagnostic scan tool, select Parameter Reset and follow the on-screen instructions.

Key Programming Using Diagnostic Equipment. General Procedures

Programming WARNING: Before beginning any service procedure in this section, refer to Safety Warnings in section 100-00 General Information...

Passive Anti-Theft System (PATS) Transceiver. Removal and Installation

Removal Remove the steering column shrouds. Refer to: Steering Column Shrouds (501-05 Interior Trim and Ornamentation, Removal and Installation)...

Other information:

Ford Fiesta 2014 - 2019 Service Manual: Handles, Locks, Latches and Entry Systems - System Operation and Component Description. Description and Operation

System Operation System Diagram Item Description 1 Liftgate/Luggage Compartment Lid Release Switch 2 Lock Actuator 3 Lock/Unlock Feedback 4 Left Rear Door Latch 5 Lock Actuator 6 Lock/Unlock Feedback 7 Left Front Door Latch 8 Lock Actuator 9 Lock/Unlock Feedback 10 Righ..

Ford Fiesta 2014 - 2019 Service Manual: SYNC Module [APIM] to Universal Serial Bus (USB) Port Cable. Removal and Installation

Removal NOTE: Removal steps in this procedure may contain installation details. NOTE: The instrument panel and floor console USB cables are taped into the wiring harness. Because the USB cables cannot be removed from the harness, this procedure applies to replacement of the cables only. Instrument panel USB cable Remove the FDIM . Refer to: Front Display Inte..

Wheels and Tires. Diagnosis and Testing

Preliminary Inspection

Verify the customer concern by carrying out a road test on a smooth road. If any vibrations are apparent, Refer to the Symptom Chart: NVH.
To maximize tire performance, inspect for signs of incorrect inflation and uneven wear, which may indicate a need for balancing, rotation or front suspension alignment.
Correct tire pressure and driving techniques have an important influence on tire life. Heavy cornering, excessively rapid acceleration and unnecessary sharp braking increase tire wear.

Correct tire pressure and driving techniques have an important influence on tire life. Heavy cornering, exce