Overview
Multiplexing
is a method of sending 2 or more signals simultaneously over a single
circuit. Multiplexing allows 2 or more electronic modules (nodes) to
communicate over a twisted wire pair [data (+) and data (-)] network...
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the brake master cylinder.
Refer to: Brake Master Cylinder (206-06 Hydraulic Brake Actuation, Removal and Installation).
NOTICE:
Do not service the brake pedal or brake booster
without first removing the stoplamp switch...
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
The roof opening panel must be open to the vent position.
On both sides.
Remove the retainers.
Torque:
27 lb.in (3 Nm)
Remove the roof opening panel glass assembly...
NOTE:
Removal steps in this procedure may contain installation details.
Remove the brake shoes.
Refer to: Brake Shoes (206-02 Drum Brake, Removal and Installation).
Disconnect the brake tube fitting.
Torque:
159 lb.in (18 Nm)
Remove the bolt and wheel cylinder.
Torque:
106 lb.in (12 Nm)
Disconnect the brake shoe lever fitting and re