Ford Fiesta Manuals

Ford Fiesta: Information and Entertainment System - General Information - Vehicles With: AM/FM/CD/SYNC / Information and Entertainment System - Overview. Description and Operation

Overview

The audio system consists of the following:

Main Components:

  • FCDIM (non-touchscreen display)
  • 6 speakers
  • ACM
  • Audio input jack (if equipped)
  • APIM
  • FCIM
  • GPSM
  • Audio/SYNC steering wheel switches
  • USB port/cable

Main Features:

  • Audio extended play
  • Compass
  • MyKey
  • Speed compensated volume
  • SYNC AppLink
  • SYNC Services - if equipped
  • SYNC

    Information and Entertainment System - Component Location. Description and Operation

    ..

    Information and Entertainment System - System Operation and Component Description. Description and Operation

    System Operation System Diagram Network Message Chart   ACM Module Network Input Messages Broadcast Message Originating Module Message Purpose Audio button state   FCDIM Used to indicate when a button is pressed on the FCIM ...

    Other information:

    Ford Fiesta 2014 - 2019 Service Manual: Pinpoint Test - DTC: CC. Diagnosis and Testing


    U0155:00 Normal Operation and Fault Conditions The RCM uses information contained in messages from the IPC sent on the HS-CAN .   DTC Fault Trigger Conditions   DTC Description Fault Trigger Conditions U0155:00 Lost Communication with Instrument Panel Cluster (IPC) ..

    Ford Fiesta 2014 - 2019 Service Manual: SYNC Module [APIM] to Universal Serial Bus (USB) Port Cable. Removal and Installation


    Removal NOTE: Removal steps in this procedure may contain installation details. NOTE: The instrument panel and floor console USB cables are taped into the wiring harness. Because the USB cables cannot be removed from the harness, this procedure applies to replacement of the cables only. Instrument panel USB cable Remove the FDIM . Refer to: Front Display Inte..

    Categories

    Ride Height Measurement. General Procedures

    Special Tool(s) / General Equipment

    Surface Gauge

    Check

    Ride Height Measurement - Front

    NOTE: Make sure that the vehicle is positioned on a flat, level surface and the tires are inflated to the correct pressure. Vehicle should have a full tank of fuel.

    Ride height = 2-3
    Measurement 2
    Measurement 3
    Use the General Equipment: Surface Gauge

    read more

    Copyright © 2025 www.fofiesta7.com