Ford Fiesta: Manual Transmission - 6-Speed Manual Transmission – B6 / Specifications
Filling Capacities
|
6-Speed Manual Transaxle - B6
|
Specifications
|
Litres
|
|
Motorcraft® Dual Clutch Transmission Fluid XT-11-QDC
|
WSS-M2C200-D2
|
1.67 (Dry fill)
|
Transmission Ratios
|
Gears
|
1.6L EcoBoost - Sigma
|
|
1st gear
|
3.727
|
|
2nd gear
|
2.048
|
|
3rd gear
|
1.357
|
|
4th gear
|
1.032
|
|
5th gear
|
0.821
|
|
6th gear
|
0.690
|
|
Reverse gear
|
3.818
|
|
Final drive
|
3.824
|
Shim thickness required
|
Type
|
Differential
|
|
Available shims (mm)
|
0.00
in (
.1
mm) -
0.04
in (
1.1
mm) (Available in 0.10 mm increments)
|
The B6 6-speed manual transmission is a fully synchronized transmission including reverse gear.
The 1st and 2nd gears are triple cone synchronized. The 3rd, 4th, 5th, 6th and reverse gears are single cone synchronized...
Other information:
Removal
NOTE:
Removal steps in this procedure may include installation details.
Refer to: Health and Safety Precautions (100-00 General Information, Description and Operation).
Remove the brake drum.
Refer to: Brake Drum (206-02 Drum Brake, Removal and Installation)...
Check
NOTE:
Refer to the appropriate Section 303-01 for the specification.
Measure the cylinder bore at the top, middle and bottom
of piston ring travel in 2 directions as indicated. Verify the cylinder
bore is within the wear limit...
Categories
Removal
NOTE:
Removal steps in this procedure may contain installation details.
WARNING:
Before beginning any service procedure in this
manual, refer to health and safety warnings in section 100-00 General
Information. Failure to follow this instruction may result in serious
personal injury.
Refer to: Health and Safety Precautions (100-00 General Information, Description and Operation).
Remove the wheel and tire.
Refer to: Wheel and Tire (204-04A Wheels and Tires, Removal and Installation).
read more